Tutorial on configuring NestBroswer and dynamic residential proxy

Step 1: Preparation

Before integration, you need to complete the following preparations

1. Download, install and log in to NestBroswer

2. To obtain the proxy IP, please refer to the tutorial: Dynamic Residential Proxy

Step 2: Proxy configuration

API configuration

API configuration is authenticated through IP whitelist. Please make sure you have added your local IP to the whitelist before configuration

Please refer to the tutorial for adding whitelist: IP whitelist tutorial 

1. Click New Browser

2. Fill in the proxy information

A. Copy the extracted IP and port, and paste them into the IP (host) and port of the configuration interface

B. Click Detect Proxy. After the detection is successful, click Save

3. You can see the successfully configured browser in the account interface. Click Open to use

Account and password configuration

1. Click Browser Configuration-Add

2. Fill in the proxy information

① Click Custom Proxy and select the protocol to be used. Here, the socks5 protocol is used as an example

② Paste the host, port, account, and password into the corresponding position

③ Click Detect Proxy. After the detection is successful, click Confirm

3. You can see the successfully configured browser in the browser configuration interface. Click Open to use

You have successfully integrated LunaProxy with NestBroswer!

Connection failed

If the test fails, please refer to our test tutorial: Proxy cannot connect