Tutorial on configuring Maskfog and dynamic residential proxy

Step1: Preparation

Before integration, you need to complete the following preparations

1. Download and install Maskfog

2. To obtain the proxy IP, please refer to the tutorial: Dynamic Residential Proxy 

Step2: Proxy Configuration

API Configuration

API configuration is authenticated through the IP whitelist. Please make sure that you have added the local IP to the whitelist before configuration

To add a whitelist, please refer to the tutorial: IP whitelist authentication

1. Click Proxy Service-Configure Device

2. Enter the proxy information

① Enter the proxy name and select the proxy type according to the needs. Here, socks5 is used as an example

② Then paste the IP and port into the proxy host and proxy port positions

③ Click Detect Proxy. After the detection is successful, click Confirm

3. Click New Configuration, select Proxy List, and click Proxy

4. Bind the already configured OK proxy server and close the window

5. After successful binding, click OK

6. You can see the successfully configured browser in the configuration management interface, click open to use

Account and password configuration

1. Click Proxy Service-Configure Device

2. Enter proxy information

① Enter the proxy name and select the proxy type according to the needs. Here, socks5 is used as an example

② Fill in the IP, port, account, and password in the corresponding position

③ Click Detect Proxy. After successful detection, click Confirm

3. Click New Configuration, select Proxy List, and click Proxy

4. Bind the configured proxy server and close the window

5. After successful binding, click OK

6. You can see the successfully configured browser in the configuration management interface, click Open to use

You have successfully integrated LunaProxy with Maskfog!

Connection failed

If the detection fails, please refer to our test tutorial: Proxy cannot connect